Next up we are running cabling throughout the studio for all of the microphone, console, and outboard connections.
In order to gain some much needed ceiling height in the studio, we dug out the basement floor and dropped it about 8”.This gave us an opportunity to bury some 4” conduit to conceal wiring runs from the console to the credenza and the back of the control room.
Tie Me Up
Additional wiring was run in the walls to strategically placed MTL (mic tie line) panels in the tracking room, vocal booth, sound lock and control room.
Thom and Roger from Canova Audio are building custom cables and labeling everything to make managing the complex connections in the studio a breeze.
Our custom patch bay is integrated with the console with a custom surround by Brett Acoustics.
Lastly, the main monitors, ATC SCM 100s have been installed at the front of the control room, ready to be wired up.
Stay tuned for more updates as we round the final corner and install outboard gear…
PDX Studio : Getting Wired(5/28/2019)-PDX Studio : Getting Wired - we are installing custom cabling for our SSL console, microphones, outboard gear and more.
PDX Studio : Floors & Doors(4/16/2019)-This week, we’ll look at the installation of our soundproof doors from IAC Acoustics and the walnut flooring.
PDX Studio : Building the barricade…(4/9/2019)-We’ve had a pause in updates but work has continued on through the winter albeit a bit slower as the attention of the crew returned to the main house above the studio. We’re in the final stages now and I wanted to catch this thread up with progress since the …
Hold On To Your Hat – Channels…(8/24/2018)-Next up at King’s Hill Sound PDX was the installation of isolation hangers and “hat channel” to suspend the drywall from the studs.
Tinfoil Hats & Warning Lights(7/23/2018)-King's Hill Sound - PDX Studio Update - electrical pre-wire, seismic retrofit, insulation and EMI abatement. Tinfoil Hats & Warning Lights.
King’s Hill Sound – Coming to PDX in 2019!(7/9/2018)-We are excited to share some details on the studio we are building in the City of Roses - Portland, OR. Designed by Wes Lachot, the studio will be located in SW Portland in the King's Hill neighborhood.